- Products & Services
- Aquaculture Solutions and Services
- Atmospheric Gases
- Electronic Gases and Chemicals
- Energised Solutions
- Food Chilling
- Food Freezing
- Food Grade Gases
- Fuel Gases
- Gas Mixtures
- Heat treatment
- Packaged Chemicals
- Pharmaceutical Solutions
- Plant and pipeline services
Plastics & Rubber Solutions
- PLASTINUM Foam Injection Moulding
- PLASTINUM Gas Injection Moulding with N?
- PLASTINUM Gas Injection Moulding with CO?
- PLASTINUM Gas Injection Moulding with Inner Cooling
- PLASTINUM Injection Moulding Inerting
- PLASTINUM Spot Cooling with CO?
- PLASTINUM Dynamic Temperature Control with CO?
- PLASTINUM Extrusion Foaming with CO?
- PLASTINUM Polyurethane Foaming with CO?
- Pulp & Paper Equipment
- Refining Solutions
- Shielding Gases
- Specialty Gases & Equipment
- Welding and Safety Products
- Supply Modes
- Health & Safety
Jointly developed by Linde and Kunststoff-Institut Lüdenscheid, PLASTINUM® Foam Injection Moulding technology combines the benefits of simple chemical foaming with the efficiency gains of physical foaming. After drying, the plastic granulate is impregnated with the blowing agent carbon dioxide (CO2) in a pressure vessel (autoclave) upstream of the injection moulding machine. The amount absorbed by the granulate depends on the plastic material, pressure, temperature and impregnation time. The CO2 typically remains in the granulate for a period of more than two hours after it has been loaded and the pressure released. This extended holding time enables a highly stable and reproducible process.
Benefits of PLASTINUM Foam Injection Moulding technology
- Ease of installation and operation – can be retrofitted to almost all machines regardless of the manufacturer
- Few or no modifications to existing machinery required
- Up to 60% lower costs than alternative physical foaming solutions
- Increased production flexibility as several injection moulding machines can be supplied simultaneously
- Maximum return on capital investment as the same machine can be used for foamed and solid parts
The peripheral systems enabling plastics manufacturers to quickly and easily integrate physical foaming technology into existing injection moulding installations consist of several building blocks jointly developed by Linde and ProTec Polymer Processing GmbH:
- PLASTINUM perfoamer conditioner, which ensures the appropriate temperature and residual humidity of the granulate
- PLASTINUM perfoamer impregnation unit (autoclave and granulate storage)
- A conveying unit
The plastic granule impregnation (with CO2) and feeding process is fully automatic. Since the system can supply many machines simultaneously, PLASTINUM Foam Injection Moulding is economically viable for both small and large batches.
Depending on volume requirements, the CO2 gas can be supplied from cylinder bundles or a bulk tank. Linde and ProTec custom-designed and developed a special manifold to ensure optimum foaming performance and security of supply by automatically switching from an empty to a full cylinder bundle.
If a bulk tank is the preferred supply mode, PLASTINUM Foam Injection Moulding is accompanied by a member of our PRESUS® family of cost-effective, high-pressure gas supply solutions. PRESUS C is an energy-efficient pressure-boosting unit ideal for CO?-based moulding processes. The entire gas supply, boosting and injection package has been specially engineered to maximise the physical properties of CO? as a foaming agent for stable, predictable outcomes in foam injection moulding.
Gas supply for granulate impregnation.
Multiple injection moulding machines can be supplied from one gas supply scheme including PLASTINUM Perfoamer system consisting of granulate conditioning and impregnation unit.